WEKO3
アイテム
プラスティツクの転造加工について(歯車の場合)
http://hdl.handle.net/10105/3485
http://hdl.handle.net/10105/348576c9a389-baf8-4e05-8b50-1214ca3bd16b
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
NUE11_2_81-85.pdf (420.7 kB)
|
|
| アイテムタイプ | 紀要論文 / Departmental Bulletin Paper(1) | |||||||
|---|---|---|---|---|---|---|---|---|
| 公開日 | 2010-06-03 | |||||||
| タイトル | ||||||||
| タイトル | プラスティツクの転造加工について(歯車の場合) | |||||||
| 言語 | ||||||||
| 言語 | jpn | |||||||
| 資源タイプ | ||||||||
| 資源タイプ | departmental bulletin paper | |||||||
| 著者 |
徳永, 恵則
× 徳永, 恵則
|
|||||||
| 著者(ヨミ) | ||||||||
| 姓名 | トクナガ, ヨシノリ | |||||||
| 著者別名 | ||||||||
| 姓名 | TOKUNAGA, Yosinori | |||||||
| 抄録 | ||||||||
| 内容記述タイプ | Abstract | |||||||
| 内容記述 | I tried to manufacture mechamical element parts in the rolling method instead of the injection molding way. 1) As the result of cold rolling the free drive, the manufacturing was found possible 0.1M～0.6M. Though, not the same way according to the nature of materials, the hot rolling seems suitable over 0.7M. 2) The rolling possibility of each material when the cold rolling is applied is fair, as far as Polyvinyl Chroride, Styrol, Acril, Cycholac and Tyril are concerned, and grows gradually worse in the order of Polyethelen, Hyzex and Nylon. Out of gear blanks got from logs rather than from blanks, a better result can be obtainable without any difference of strength caused by the directions of blanks. 3) As the rolled plastic has less mounding character than metals, gear blanks outside diamter coincides with addendum circle diameter of the finished gear. 4) Among the rolling conditions, the rolling speed is better when the rotating speed is low while the pressing speed of the die-rollers is great. | |||||||
| 書誌情報 |
奈良学芸大学紀要. 自然科学 巻 11, p. 81-85, 発行日 1963-02-28 |
|||||||
| ISSN | ||||||||
| 収録物識別子タイプ | ISSN | |||||||
| 収録物識別子 | 03693937 | |||||||
| 書誌レコードID | ||||||||
| 収録物識別子タイプ | NCID | |||||||
| 収録物識別子 | AN00181015 | |||||||
| 著者版フラグ | ||||||||
| 出版タイプ | VoR | |||||||
| その他のタイトル | ||||||||
| その他のタイトル | On the Plastics Rolling (in Case of Gears) | |||||||
| 出版者 | ||||||||
| 出版者 | 奈良学芸大学 | |||||||
